|
Post by borisfr on Aug 13, 2016 2:57:47 GMT -8
The unofficial Gameduino 2 pinout diagram explain that D2 is used to send INTERRUPT (out). I found nothing in the code of GD2 library about that. Is D2 used or available?
|
|
|
Post by jamesbowman on Aug 13, 2016 16:10:55 GMT -8
It is certainly available. But the GD2 library does not use interrupts itself.
If you program the FT8xx registers directly, you can enable and use interrupts, using the D2 pin.
|
|
|
Post by borisfr on Aug 14, 2016 0:02:15 GMT -8
Thank for the answer. So I will use D2 for my project I start to have a lack of pin on the Uno.
|
|