Post by mathiasw on Jan 28, 2014 13:13:30 GMT -8
Salut,
I have some TFT displays for my arduino and use the great UTFT library from Henning Karlsen. Now with the Gameduino2 the handling is quite different from a conceptual point of view but the porting of the code is not that difficult.
So I ported the UTFT demo that Henning has created for the 480x272 display. It nicely shows what you have to do if you want to use the gameduino as a display similar to the TFT displays.
When trying to port the 10000 pixels in the last demo step I ran into the problem that this exceeds the graphics command buffer of the GPU. I tried to use the bitmap code in the other demos here but have not been successful as the pixels do not appear. If someone has a clue, let me know. So far, that part of the demo is bypassed ( the switch never gets there) until I have found the fix.[Update]fix found, code replaced[/Update]
Ciao, Mathias
demoport.ino (10.03 KB) (new)
I have some TFT displays for my arduino and use the great UTFT library from Henning Karlsen. Now with the Gameduino2 the handling is quite different from a conceptual point of view but the porting of the code is not that difficult.
So I ported the UTFT demo that Henning has created for the 480x272 display. It nicely shows what you have to do if you want to use the gameduino as a display similar to the TFT displays.
Ciao, Mathias
demoport.ino (10.03 KB) (new)
