multiple custom fonts

[alex66]

Hi everyone, I have try to include three .h files with converted fonts but only one works. If one more included .h in code below uncommented with corresponding line of code, I got compiling error. 
When I trying to convert multiple fonts , only first in the line converted. What I doing wrong?

#include <EEPROM.h>

#include <SPI.h>

#include <GD2.h>

#include "BASICSQUARE7.h"

//#include "M39.h"

//#include "COUNTERDIAL.h"

void setup() {

pinMode(16, OUTPUT);

digitalWrite(16, LOW);

delay(50);

digitalWrite(16, HIGH);                                                                      // Teensy and Dazzler hard reset

delay(1000);                                                                                    // Must be >= 1000

GD.begin();

LOAD_ASSETS();

GD.wr16(REG_HCYCLE, 1280);                                                         // Settings

GD.wr16(REG_HSIZE, 720);                                                             // For

GD.wr16(REG_VCYCLE, 1350);                                                         // SeeefStudio

GD.wr16(REG_VSIZE, 1280);                                                            // 5in 720x1280 HDMI screen

GD.cmd_setrotate(2); //(3)connectors on right((2) connectors on left)

}



void loop() {

GD.ClearColorRGB(0x000050);

GD.Clear();

GD.VertexFormat(3);                                                                
GD.cmd_text(GD.w/2,GD.h/2-100,BASICSQUARE7_HANDLE,OPT_CENTER,"1:23:45");

// GD.cmd_text(GD.w/2,GD.h/2,M39_HANDLE,OPT_CENTER,"1:23:45");

//GD.cmd_text(GD.w/2,GD.h/2,COUNTERDIAL_HANDLE,OPT_CENTER,"1:23:45");



GD.swap();

}
Thanks in advance.

[jamesbowman]

Hi Alex,

The asset converter files can't be combined like this.

When you tried multiple fonts in the asset converter, what command-line did you use?

J.

[alex66]

I use windows10 command prompt(cmd) and I have try to place all fonts in one line:
gd3asset basicsquare7.ttf,size=90,M39.ttf,size=90,counterdial.ttf,size=90
but this way  only first font converted.

[alex66]

Please disregard, I found the way to do it. They need to be separated by spaces. Thank you for your time.