mattp
Full Member
Posts: 37
|
Post by mattp on Jan 28, 2021 1:33:08 GMT -8
Just going through the firmware build for the Dazzler to get going with my own firmware. There's a number of errors which I'm not sure about. The Verilator stage fails on duplicate definitions on these parameters: output wire uart0_wr, output wire uart0_rd,
The file "xilinxmake" mentioned in the Makefile is missing from the repo. Would it be possible to get this file included? Also, would it be possible to get the .dazzler files for the main firmware and textmode? Thanks, Matt EDIT** Now fixed in github - thanks jamesbowman
|
|