BrewBot
Junior Member
busy
Posts: 21
|
Post by BrewBot on Sept 10, 2015 10:53:35 GMT -8
In an effort to reduce the current flowing through my Arduino board, would it cause any issue to externally power the gameduino 2 vin and ground pins? If this is possible, are the Vin and ground pins as highlighted the correct ones for powering externally?
|
|
|
Post by jamesbowman on Sept 10, 2015 12:10:41 GMT -8
Yes, those two are the power inputs - external 5V power works fine.
|
|