dan
New Member
Posts: 4
|
Post by dan on Jun 12, 2015 6:53:20 GMT -8
Dear friends, I have a question regarding my latest project which inculdes a GSM shield
(http://www.tinyosshop.com/index.php?route=product/product&product_id=464)
An Arduino UNO and a Gameduino 2.
I have made many attempts of running these together, I included all the neccesary libraries and begin() commands and connected the components one on top of another, it hasn't worked or responded to any commands so far though.
Can anyone help me out by suggesting or advising me what to do?
I will appreciate and be thankful for any kind of helping.
Thank you guys, Dan.
|
|
|
Post by jamesbowman on Jun 12, 2015 10:01:42 GMT -8
I looked at the datasheet for the GSM; seems to use different pins from the GD2, so should be no problem.
When they are connected and every library is compiled, is the problem
(1) Gameduino2 does not respond? (e.g. "helloworld" sketch cannot run)
(2) GSM shield does not respond?
Or both?
|
|
dan
New Member
Posts: 4
|
Post by dan on Jun 12, 2015 22:41:11 GMT -8
Hello, thank you for replying. When all connected together the Gameduino 2 does not respond and the GSM shield either.
|
|
|
Post by jamesbowman on Jun 13, 2015 18:37:20 GMT -8
Sounds like a power issue. There is no pin conflict between the shields, so each should still work separately.
|
|
dan
New Member
Posts: 4
|
Post by dan on Jun 14, 2015 2:08:14 GMT -8
|
|