ckdur
New Member
Posts: 1
|
Post by ckdur on Mar 12, 2021 6:58:12 GMT -8
Hello, dear everyone I received recently through crowdsupply my gameduino 3X dazzler. I started by just running the Hello World application, but there is no output. I was about to try to get some debugging around but, before I even do that, maybe is something wrong with my setup? Tried with two R3 Arduino Uno. Checked voltages in both 5V and 3.3V I attach some pictures as well. Thank you for your advice. Best regards Ckristian Duran
|
|
|
Post by bobtrex on Mar 12, 2021 10:09:05 GMT -8
Hi
The pictures look fine to me. Are you using the latest version of the library ? I am using v 1.3.3 and all is working ok for me.
|
|
|
Post by bobtrex on Mar 12, 2021 10:12:32 GMT -8
From another post see below
"which makes the Uno R3 unable of supporting the Dazzler when used with the Uno R3 onboard voltage regulator, but the workaround is to power the board(s) by the USB port."
|
|