|
Post by NeX on Apr 19, 2014 9:35:17 GMT -8
Hi there,
is it possible to get the firmware for the GD2?
i want to see if i can change the output resolution so i can drive a larger screen
i want to directly drive an 800 x 480 display using the 24bit parallel RGB interface, and i was hoping to avoid any external upscaler.
thanks!
|
|
|
Post by jamesbowman on Apr 19, 2014 12:06:26 GMT -8
Unlike GD1, GD2 doesn't have firmware - the graphics is driven by a special-purpose chip, the FT800 from FTDI.
AFAIK the FT800 is limited to 512x512 resolution. This means that it can't do 800x480 directly. So an external upscaler might be required.
|
|
|
Post by NeX on Apr 21, 2014 0:22:34 GMT -8
Interesting, does that mean everything is driven from the library?
|
|