|
Post by sweetlilmre on Feb 15, 2018 2:39:11 GMT -8
Hi,
With a Gameduino 3 and Leonardo combination I have had zero success. The code seems to hang at the GD.begin(0) call (serial output works before, but not after this call). I tested on an R3 board and had immediate success. Is there something specific I need to do?
Thanks -(e)
|
|
|
Post by jamesbowman on Feb 15, 2018 7:07:14 GMT -8
Yes, Leonardo is unusual in the Arduino family - it has the SPI interface only on the ICSP header The second question here answers it: excamera.com/sphinx/gameduino2/faq.htmlEasiest way (IMHO) is to solder the three jumpers to the bottom of the Leonardo. That's what I did.
|
|
|
Post by sweetlilmre on Feb 18, 2018 8:28:54 GMT -8
Thanks James,
I'll give this a bash next week.
|
|