Post by jamesbowman on Oct 18, 2015 11:26:07 GMT -8
Cross-posted to Teensy forums: forum.pjrc.com/threads/30955-Teensy-3-2-with-Gameduino-2
I just got my Teensy 3.2 hooked up to the Gameduino 2. The current Gameduino libraries work perfectly with Teensyduino, including sdcard handling. Because Teensyduino supports the Arduino's EEPROM scheme, touch-screen calibration also works fine. Latest Gameduino2 code - with Teensy support:
www.excamera.com/sphinx/gameduino2/code.html
Hookup is as follows:
Note that the Gameduino runs off the Teensy's Vin supply - NOT the 3.3V supply. Also I had some signal trouble with 6" hookup cables - so I used 1" cables here and everything works fine.
For reference, the Gameduino's pinout is:
I just got my Teensy 3.2 hooked up to the Gameduino 2. The current Gameduino libraries work perfectly with Teensyduino, including sdcard handling. Because Teensyduino supports the Arduino's EEPROM scheme, touch-screen calibration also works fine. Latest Gameduino2 code - with Teensy support:
www.excamera.com/sphinx/gameduino2/code.html
Hookup is as follows:
Teensy Gameduino2
------ ----------
GND GND
Vin +5V
8 D8 (GPU sel)
9 D9 (SD sel)
11 (DOUT) D11 (MOSI)
12 (DIN) D12 (MISO)
13 (SCK) D13 (SCK)
Note that the Gameduino runs off the Teensy's Vin supply - NOT the 3.3V supply. Also I had some signal trouble with 6" hookup cables - so I used 1" cables here and everything works fine.
For reference, the Gameduino's pinout is: