|
|
Backlight
Sept 17, 2015 8:33:27 GMT -8
via mobile
Post by Hedrick8396 on Sept 17, 2015 8:33:27 GMT -8
Can the backlight be controlled in software? Dimable? If not what pins on the ribbon cable are for the backlight so I can and pmw for dimming.
|
|
|
|
Post by jamesbowman on Sept 17, 2015 9:25:12 GMT -8
|
|
|
|
Post by hedrick2319 on Sept 17, 2015 12:48:39 GMT -8
Thanks! I'll try that later. I am using mine with an Arduino pro mini with a 650 mah battery with a step up converter to 5v. I wanted a way to read the battery state and post it in the upper right corner. So I wrote a small pro game to do that. It uses A6 to read and I had to put a transitor in between A6 and the battery so when I turned it off it wouldn't get power back though A6 pin. Works pretty good so far. Also added to froger!
|
|
