GD3 connect to esp8266

[powersoft]

Hello,

Try co compile the "hello world" example on a esp8266.
Get this messages:

Build-opties gewijzigd, alles wordt opnieuw gebuild
In file included from /Users/jankromhout/Documents/Arduino/libraries/Gameduino2/GD2.cpp:59:0:
/Users/jankromhout/Documents/Arduino/libraries/Gameduino2/transports/wiring.h: In member function 'void GDTransport::ios()':
/Users/jankromhout/Documents/Arduino/libraries/Gameduino2/transports/wiring.h:3:12: error: 'D8' was not declared in this scope
#define CS D8
^
/Users/jankromhout/Documents/Arduino/libraries/Gameduino2/transports/wiring.h:20:13: note: in expansion of macro 'CS'
pinMode(CS, OUTPUT);
^
/Users/jankromhout/Documents/Arduino/libraries/Gameduino2/GD2.cpp:17:23: error: 'D9' was not declared in this scope
#define SD_PIN D9 // pin used for the microSD enable signal
^
/Users/jankromhout/Documents/Arduino/libraries/Gameduino2/transports/wiring.h:22:13: note: in expansion of macro 'SD_PIN'
pinMode(SD_PIN, OUTPUT);


What to change to get this example get running?
I thought  the GD2/3 library is prepared for the esp8266!

Thanks for any help

[Sharp6]

Hey powersoft,

I'm currently facing the same errors. What did you do to fix them?