pls
Junior Member
Posts: 24
|
Post by pls on May 17, 2018 19:10:43 GMT -8
I received a new GD3 board a few days ago and I have been working through the test programs. I am using a UNO3 board along with GD3.
It appears that the GD3 board that I received does not have an accelerometer installed. In fact there does not seem to be any PCB lines going from A0,A1 and A2. Is this correct that you have deleted the accelerometer chip from the design? Thanks for making such a wonderful board.
-pls
|
|
|
Post by jamesbowman on May 18, 2018 6:04:03 GMT -8
Hi pls, yes the GD2 had an accelerometer, but the GD3 does not.
Relatively few people were interested in the GD2's accelerometer. With GD3 I was aiming for a lower cost design, so the accelerometer was removed.
|
|
pls
Junior Member
Posts: 24
|
Post by pls on May 18, 2018 9:57:53 GMT -8
Thanks for the information. -pls
|
|