Any one has a working example for rapberry pi or beaglebone? I don't have ADAM breakout board so i buy and adapter from FPC10 to DIP and all connections seems to be good, i don't have analyzer to see how spi port is working but in the same port i can play with other devices and i had uncommented printf on __read and __write functions and all seems to be ok.
Well your doing it the hard way. if your going from a common 40 pin out touchscreen to a beaglebone you should just use a decoder to decode the signal to HDMI. the gameduino2 encodes the pins for arduino use, but beaglebone black has a HDMI built in.