|
Post by bigtreeman on Oct 20, 2021 19:11:54 GMT -8
Another new Dazzler user. I'm running a dazzler on a dev board and discovering a few issues. If I connect a hdmi monitor, 1m,n,8,1 serial to console pins 1, 2 then power up, all good.
The screen shows gameduino dazzler 1.1.0, (but that's about all I get out)
$ cu -l /dev/ttyUSB0 -s 1000000 Connected.
boot_base | slot 0 | 4B:33:E2:A2:3C:0E:32 | 08 Dec 2020 19:31 | GENERAL5=0000 |
Gameduino 3X Dazzler Press ^C for command prompt ok slots 0 Dazzler boot (1.1.0) 1 Text mode 2 - 3 - 4 - 5 - 6 - 7 - ok
Can I load a new bin to an empty slot then run that code ?? I haven't got a microSD slot
1 run
Textmode 007C ...............dead
kills screen and console, power off/on doesn't get it back, have to disconnect/reconnect hdmi to get it going initially I just want a text mode terminal/keyboard then shell.py or minicom to compile source then xilinx or icestudio to fiddle the silicon
waiting for an ftdi-usb adaptor insead of my ch340-usb adaptor for icestudio
|
|